Error 0x8007000D translates to ERROR_INVALID_DATA — Windows Update opened the package and found contents it couldn’t trust. The download may have corrupted in transit, the component store may hold damaged files, or an installer payload may fail its own validation. Either way, Windows refuses to install data it can’t verify, which is the correct behavior even if the error message is terse.

On HP laptops there’s an extra wrinkle: HP driver packages and Microsoft updates share the same download machinery, and a corrupted HP driver fragment can poison the cache for everything behind it. The fix order is about integrity — verify the system files, rebuild the store, clear the cache, and eliminate whatever is corrupting the data.

Think of this error as a quality-control rejection at a factory gate: the parts arriving don’t match the blueprint, so the line stops. Your job isn’t to force the gate open — it’s to ensure good parts arrive. Each fix below improves one link in that supply chain, from the files on disk to the downloads in flight, and the update installs itself once every link passes inspection. HP’s shared download machinery means one corrupted HP driver fragment can fail validation for the entire queue, which is why the HP-specific checks come first. Clear the HP side, and Microsoft’s updates often start passing inspection immediately afterward on the next attempt.

Why this happens

  • Corrupted update downloads. Interrupted or proxy-mangled transfers fail validation.
  • Component store corruption. Damaged files in WinSxS fail integrity checks during install.
  • Poisoned SoftwareDistribution cache. Bad fragments from earlier failures get reused.
  • Antivirus quarantining update files. Security software removing pieces of the package.
  • Corrupted HP driver packages. HP driver fragments in the shared cache failing validation.
  • Disk errors. Bad sectors silently altering stored update files.
  • Interfering third-party tools. “Cleaners” deleting files the updater needs mid-operation.

How to fix it

Work through these in order — diagnose first, then act.

Fix 1: Identify the corrupted package

Know what failed before repairing.

  1. Open Settings > Windows Update > Update history and find the 0x8007000D entry; note the KB number and whether it’s a driver or a Microsoft update.
  2. If it’s an HP driver, open HP Support Assistant first and let it handle that driver separately — a clean HP-side install may clear the whole failure.
  3. If it’s a cumulative or feature update, continue with the system repairs below.

Fix 2: Repair system files with SFC

Start with the lightest integrity repair.

  1. Open Command Prompt as administrator and run sfc /scannow.
  2. Let it reach 100 percent without interrupting it.
  3. If it repaired files, restart and retry the update.
  4. If it found nothing or couldn’t fix everything, move on — SFC only covers protected system files, not the whole update store.

Fix 3: Rebuild the component store with DISM

DISM repairs the store that the updater validates against.

  1. In an administrator Command Prompt, run DISM /Online /Cleanup-Image /RestoreHealth.
  2. Wait for full completion — it downloads clean replacements for damaged components.
  3. Run sfc /scannow again afterward to confirm the system files are consistent with the rebuilt store.
  4. Restart and retry the update. This pair resolves the pure-corruption variant of 0x8007000D.

Fix 4: Clear the download cache

Fresh store, fresh downloads — remove the poisoned fragments.

  1. In an administrator Command Prompt: net stop wuauserv, net stop bits, net stop cryptsvc.
  2. Rename the caches: ren C:\Windows\SoftwareDistribution SoftwareDistribution.old and ren C:\Windows\System32\catroot2 catroot2.old.
  3. Restart the services: net start wuauserv, net start bits, net start cryptsvc.
  4. Check for updates; every package now downloads clean with nothing stale to fail validation.

Fix 5: Clean boot to isolate interference

Something may be corrupting or blocking files during the install.

  1. Press Windows key + R, type msconfig, and on the Services tab check Hide all Microsoft services, then click Disable all.
  2. In Task Manager’s Startup apps, disable everything, then restart.
  3. In this clean state, retry the failing update.
  4. If it succeeds, re-enable services in halves to find the culprit — usually an overzealous cleaner or security tool. HP’s essential utilities can be reinstalled from the HP support site if needed.

Fix 6: Install manually and check the disk

For the last stubborn cases, bypass and verify hardware.

  1. Download the failing KB’s x64 .msu from the Microsoft Update Catalog and install it standalone.
  2. If manual install also fails validation, run chkdsk C: /f /r in an administrator Command Prompt (schedule at reboot) to rule out disk errors.
  3. Review the results after the disk check completes.
  4. Microsoft’s official Windows Update support hub documents these integrity repairs for further reading.

Fix 7: Re-register the Windows Update DLLs

If the updater’s own components are misregistered, validation fails even with healthy files.

  1. In an administrator Command Prompt, stop the update services: net stop wuauserv, net stop bits, net stop cryptsvc.
  2. Re-register the core DLLs one by one: regsvr32 atl.dll, regsvr32 urlmon.dll, regsvr32 mshtml.dll, regsvr32 shdocvw.dll, regsvr32 browseui.dll, regsvr32 jscript.dll, regsvr32 vbscript.dll, regsvr32 scrrun.dll, regsvr32 msxml.dll, regsvr32 msxml3.dll, regsvr32 wuapi.dll, regsvr32 wuaueng.dll, regsvr32 wups.dll — clicking OK on each confirmation.
  3. Restart the services: net start wuauserv, net start bits, net start cryptsvc.
  4. Retry the update; correctly registered components validate packages properly.

Closing

Error 0x8007000D is Windows refusing to install data it can’t verify, and the SFC-DISM-cache sequence restores trustworthy data in the great majority of cases on HP laptops. For the generic walkthrough, see the step-by-step 0x8007000D guide , and if your failure is a missing prerequisite rather than invalid data, the 0x800F0831 guide for HP laptops is the right companion.

Frequently asked questions

What does error 0x8007000D mean on an HP laptop?
It is ERROR_INVALID_DATA: Windows Update found update data it could not use — a corrupted download, a damaged component store, or a package whose contents fail validation. On HP laptops, interrupted HP driver downloads landing in the same cache as Microsoft’s updates are a common source. The repair sequence below re-validates the system files, rebuilds the store, and clears the cache.
Is 0x8007000D a sign my hard drive is failing?
Usually not. The error overwhelmingly comes from corrupted downloads or update metadata, not dying storage. However, if you see this error alongside other file corruption — documents failing to open, frequent app crashes — run a disk check, because a failing drive can corrupt anything it stores, including update packages. One isolated update error is not a drive diagnosis.
Why does the error keep coming back after DISM?
If DISM completes and the error returns on the next check, the corruption source is still active: a bad download cache that was never cleared, an antivirus quarantining update files, or a proxy corrupting transfers. The sequence matters — repair the store, then reset the cache, then test with security software paused — so the fresh files are not immediately re-corrupted.
Can HP Support Assistant fix this error?
Partially. If the corrupted package is an HP driver, letting Support Assistant reinstall it cleanly can clear the failure. But Support Assistant cannot repair Microsoft’s component store or system files, so for cumulative updates and the 0x8007000D code itself you need SFC, DISM, and the cache reset. Use HP’s tool for HP drivers, Microsoft’s tools for the update engine.